All-in-one product (primer, undercoat, and topcoat)
Water-based coating with high build acrylic polymer resins
Microporous and breathable
Alkali resistant
Resists cracking and flaking
100% VOC-free
Heat resistant to 80°C
Quick drying – recoatable in 4hrs
Non-flammable
100% VOC-free and odour-free
No solvents or spirits are release into atmosphere when using this product. Perfect for use where a non-hazardous product would be preferred, such as education healthcare, occupied commercial and public buildings. Also safe for internal use.
Physical properties
Surface preparation
The substrate must be sound, dry, and free from oil and grease. Cleaning should be carried out with liquid detergent solution, rinsed with clean water, and allowed to dry.
Surfaces which are contaminated with lichen or moss should be brushed clean, treated with Anti-Fungal Wash, and allowed to dry.
Any repairs should be carried out before application. Plastic, rubberised and metal surfaces should be rubbed down with abrasive paper prior to application.
Application
Suitable for brush, roller, or spray application (dilute with 10% water if spraying). No primer or undercoat is necessary unless used on ferrous metal or where staining could occur. For very porous substrates thin the first coat with 30% water.
For best results apply to a touch dry surface, and at temperatures between 10°C to 32°C. Do not apply at temperatures below 8°C. Ensure good ventilation during and after application. Wear gloves, goggles, and suitable PPE.
Optimum hardness is reached after 2 weeks. Ensure good ventilation during application and drying.
Storage guidelines
Store indoors, away from direct sunlight in original container, in a dry place at temperature between 5 and 40°C.
Keep out of reach of children.
Shelf life is 12 months under above mentioned storage conditions.
Technical support and advice
Got a technical query? No problem. Give us a call or send us a message and we’ll be happy to help.