Perfect for:
Kitchens
Joinery
Soft wood
Indoor furniture
Internal doors
MDF
Cabinetry
Hard wood
Plywood
Surface preparation
Ensure substrate is clean and free of any resin contamination. Sand the surface using 320–400 grit abrasive prior to coating. This topcoat can be applied over water-based, polyester, or UV basecoats. Applying over nitrocellulose or polyurethane basecoats is not advised.
Application
Suitable for soft bristle brush, short pile roller, or spray application. For best performance, apply by spray. Wherever possible, prioritise optimising spray settings and working conditions to achieve the finest atomisation rather than diluting with water.
For conventional spray, use a 2–2.5mm nozzle at 3–4 bar pressure. For Air Mix, use a Nozzle 11 at 80–110 bar coating pressure. For airless spray, use a Nozzle 11 at 120–150 bar.
Curing and aftercare
At 20°C, dust-free in 45 minutes, handling in 1.5 hours, and stackable after 12 hours. If using a forced drying system, allow 2 minutes flash-off (30°C) followed by 10 minutes laminar air (45°C); stackable after cooling and 1 hour total. Achieves full durable hardness over a period of a few weeks. For cleaning the surface during this period, use a damp soft cloth.
Storage
Store in a cool, dry, well-ventilated area between 5°C and 35°C in correctly labelled, tightly closed containers.
Shelf life is 12 months under these conditions.
Safety
This product is water-based and non-flammable, making it a safer alternative to traditional solvent systems. However, appropriate care must still be taken during handling.
Water-based coatings can act as skin and eye irritants; it is important to wear protective gloves and eye protection when handling. Spills or splashes must be removed immediately while wet - if allowed to dry, the material becomes highly durable and can only be removed mechanically or with harsh chemicals.
Environmentally hazardous - do not allow wet product to enter water courses, drains, sewers, or the general environment.
First aid
Eye contact
Remove contact lenses. Irrigate copiously with clean, fresh water for at least 10 minutes, holding lids apart. Seek medical advice.
Inhalation
Seek fresh air, keep patient warm and at rest. If breathing is irregular or stopped administer artificial respiration. Give nothing by mouth. If unconscious place in the recovery position. Seek medical advice.
Skin contact
Remove contaminated clothing, wash skin thoroughly with soap and water, or use a proprietary skin cleanser. Do not use solvents or thinners. Seek medical advice if symptoms persist.
Ingestion
If accidentally swallowed, DO NOT INDUCE VOMITING. Keep at rest and obtain medical attention, show the container label. Protection of first aiders: No action shall be taken involving any personal risk or without suitable training.
Technical support and advice
Got a technical query? No problem. Give us a call or send us a message and we’ll be happy to help.