Perfect for:
Kitchens
Trim
Hard wood
Indoor furniture
Doors
Soft wood
Cabinetry
Engineered wood
Plywood
Physical and chemical properties
Surface preparation
Remove all loose contamination from substrate such as dust and dirt. All surfaces should be grease free and sanded ready to be coated. Wipe the surface with White Spirit.
Ideal for use over Trade Coatings Wood Stain, or coat-on-coat application with a light sand in between each coat.
If using on MDF we recommend the use of Trade Coatings MDF Sealer first as a base coat.
Application
Supplied with correct ratio amount of catalyst. Pour all into main container and mix thoroughly. If using part quantities, ensure catalyst is added to the same ratio.
Suitable for brush, roller, or spray application. Allow at least 30 minutes drying time before sanding and overcoating (longer in temperatures below 18°C).
For airless spray use a 1.7mm or 1.8mm nozzle. If necessary, thin with Trade Coatings Thinner.
Curing and aftercare
Achieves full durable hardness over a period of a few weeks. For cleaning the surface during this period use a damp soft cloth.
Handling and storage
Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Use explosion proof equipment. Keep away from sources of ignition - No smoking. Shelf life is 24 months under above mentioned storage conditions
Keep in a cool, dry, well ventilated area. Keep containers tightly closed. Store in correctly labelled containers.
Safety
For professional use only.
Note, this product is solvent based and therefore flammable, so please take appropriate care when using.
Acid-catalysed lacquers are skin and eye irritants and sensitisers. It is extremely important to wear protective gloves and eye protection when handling. Spills or splashes must be removed immediately – if allowed to dry, material can only be removed mechanically or with heat and/or harsh chemicals.
Environmentally hazardous - do not allow wet product to enter water courses, drains, sewers or the general environment.
First aid
Skin contact
Irritating to skin. Wash off immediately with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation or symptoms persist.
Eye contact
Irritating to eyes. Rinse immediately with plenty of water for 15 minutes holding the eyelids open. Seek medical attention if irritation or symptoms persist.
Inhalation
Irritating to respiratory system. Inhalation may cause coughing, tightness of the chest and irritation of the respiratory system. Move the exposed person to fresh air. Seek medical attention.
Ingestion
Ingestion may cause nausea and vomiting. Seek medical attention if irritation or symptoms persist. DO NOT INDUCE VOMITING.
Firefighting measures
Extinguishing media
Carbon oxides.
Fire hazards
Highly flammable. Burning produces irritating, toxic and obnoxious fumes. Vapour may travel considerable distance to source of ignition and flash back.
Protective equipment
Self-contained breathing apparatus. Wear protective clothing.
Symbols
F - Highly flammable; Xi – Irritant
Risk phrases
R11 - Highly flammable.
R36 - Irritating to eyes.
R67 - Vapours may cause drowsiness and dizziness.
Safety phrases
S1/2 - Keep locked up and out of the reach of children.
S13 - Keep away from food, drink, and animal feeding stuffs.
S16 - Keep away from sources of ignition - no smoking.
S46 - If swallowed, seek medical advice immediately and show this container or label.
Technical support and advice
Got a technical query? No problem. Give us a call or send us a message and we’ll be happy to help.